HC-300 Kit™

Bioremediation of soil & ground water contaminated by hydrocarbons


A safe, natural and effective product, allows in-situ bioremediation of soil contaminated by oil, thus saving the costs of removing hazardous hydrocarbon waste and having a minimal impact on the environment.

  • Cost-effective
  • Safe to handle, with no requirement for specialist PPE
  • Custom blend to suit your requirements
  • Minimal impact on the environment

Suggested uses

land or ground water contaminated with hydrocarbons – typically heating oils, motor oils, crude oil, jet fuel, glycol, kerosene, solvents, grease etc.


How to use

Easy to use – Liquid Remediact™ is supplied as a concentrate.

Dilute HC-300™ 1 part to 5 parts water. Each diluted gallon with remediate approximately one cubic year of soil or 200 gallons of water.

To apply, one of the following methods is recommended: Pressure spraying; Geoprobe Injection; Gravity Feed System; Automatic Dosing Equipment; Pressure Spraying; Monitoring Well Injection.

Applying at a temperature between 42°F and 120°F (6°C and 49°C) will improve the effectiveness of the product.


Product Information

Non-hazardous; non-corrosive; non-caustic; non-toxic;

pH: 6.9 to 7.5

HC-300™ is supplied in: 18L Case (4 x 4.5L jugs) & 20L Cubitainer



>HC-300